Tricity
Brick cladding in Chandigarh
Chandigarh grew up with exposed brick, and plenty of owners want a new front that still sits comfortably on a sector street. Cladding gives that brick face on an existing plastered wall.
Chandigarh
Brick cladding for Chandigarh sector houses
A lot of Chandigarh work is renovation. The house already stands, the plaster is sound, and the family wants the front to look less tired. Clay cladding is glued straight onto that plaster, so the job is closer to tiling than to building, and the rooms behind the wall stay in use while it is done.
The neighbouring houses tend to push people towards calm, even brick; loud colour mixes are rare. A smooth 9×3 tile in brown or terracotta with a light grey joint is the usual answer for full fronts. For showrooms in Sector 17 or cafés in Sectors 7, 9 and 26, the slim 9×1.5 tiles give long horizontal lines that photograph well under warm light.
If you are close by, the easiest step is to come to the factory with a phone photo of the wall. We lay sample tiles out on the ground in the pattern you are thinking of so you can judge the colour in daylight.
Tiles are 20 mm thick (25 to 30 mm in the handmade series) and travel to Chandigarh by road from Village Kakkar Majra, Distt. Ambala. For quantities, see the tile calculator; for fixing, the installation guide.
Suggested tiles
Brick cladding tiles we often suggest in Chandigarh
A starting point, based on the walls described above. The full lookbook has all 19 tiles.
Reference
Brick cladding projects to compare
Work finished with our tiles. Locations are not listed; ask us if you want to see something similar near Chandigarh.
Ordering
Ordering brick cladding for a Chandigarh site
- I
Send the wall
Area in sq ft or wall sizes, a photo, and the site location in Chandigarh.
- II
See samples
We send physical samples, or you visit the factory if Chandigarh is within easy reach of Ambala.
- III
Confirm and dispatch
You get the tile rate and freight. Tiles are packed and sent by road to your site.
Questions
Brick cladding in Chandigarh: questions
Not covered here? Call +91-90411-00702 and speak to the factory.
Can brick cladding go over an old plastered wall in Chandigarh?
Usually yes. If the plaster is firm and does not sound hollow when tapped, the tiles can be fixed on it after cleaning and priming. Loose or hollow patches have to be cut out and replastered first.
Do you deliver brick cladding tiles to Chandigarh?
Yes. Tiles go by road from our factory at Village Kakkar Majra, Distt. Ambala. Share the site location and quantity and we confirm the freight to Chandigarh with your quote.
How do I get the brick cladding price in Chandigarh?
Send the wall area, the tile you like and your site location on WhatsApp at +91 90411 00702. We reply with the tile rate and the delivery cost.
Can I get brick cladding samples in Chandigarh?
Yes. We send physical samples so you can check the colour on your own wall in daylight before ordering.
Where we deliver
Other cities we deliver to
Tiles leave our kiln in Ambala district by road. Each city page describes the walls and site conditions we hear about most from there.
Quote and samples
Get a quote for your Chandigarh site
Tell us the wall area, the city and the tile you are leaning towards. The form saves your details and opens WhatsApp with the message written, so it reaches the factory directly.
- Factory
- Village Kakkar Majra, Distt. Ambala, Haryana 134202
- Phone
- +91-90411-00702
- Hours
- Mon – Sat: 9 AM – 6 PM · Sun: Closed
